The Overwatch Precision TAC Trigger is a flat-faced, direct drop-in replacement for your OEM trigger. Each trigger shoe and trigger safety tab is machined in the USA out of 7075-T6 aluminum alloy, and affixed to an NP3 plated, Gen 3 OEM trigger bar by 316 Stainless Steel coiled spring pins. The trigger shoe and safety tab are both Type III hard coat anodized to MIL-A-8625 standard.
The small indexing hook ensures consistent trigger finger placement, and the broad, flat face of the trigger allows a uniquely self-correcting, straight rearward press. The flat face reduces trigger reach by 0.24", making this an ideal option for smaller statured shooters. Pre-travel has been reduced as much as possible without compromising firearm safety features, resulting in a clean, crisp break, and reduced overtravel. Robar's NP3 plating provides virtually impermeable corrosion resistance and smooth, grit-free operation. Note that trigger pull weight does not change from factory weight with the use of this trigger alone.
End Result: This trigger is a tank. A sexy tank. Just in case you were wondering, the only difference between the Tac trigger and the DAT trigger is the small lip on the bottom of the Tac. Otherwise they are identical both form and function wise.
In case you were wondering, Gen 3 trigger bars are completely functional and safe in Gen 4 weapons.
Also, our lawyer says that this should be installed by a qualified gunsmith.
DISCLAIMER: "GLOCK" is a federally registered trademark of Glock, Inc., and is one of many trademarks owned by Glock Inc. or Glock Ges.m.b.H. Neither Overwatch Tactical LLC, dba Overwatch Precision, nor this site is affiliated in any manner with, or otherwise endorsed by Glock, Inc., or Glock Ges.m.b.H. The use of "Glock" on this page is merely to advertise the sale of Glock pistols, parts, or components.
Video on how to install our trigger in your Glock. We use a Glock 19 however the process is identical for all Glocks, except the G43 and G42.
Glockkraft Tri...Video on how to install our trigger in your Glock. We use a G...
Showing reviews 1-10 of 141 | Next
I'm living this trigger
Posted by Jason on Jan 15th 2017
It shoots better than my over a $100 more trigger I had before. Nice for me. Flat face and flat overall length makes it
Nice. Ghost edge connector doesn't seem to be compatible as the slide sticks. Hopefully their connector comes in stock soon.
Posted by spydee6 on Jan 14th 2017
Paired with the Ghost Evo Elite, a 6 lb trigger spring, a reduced power safety plunger spring and a little polishing in all the right places, I believe perfection has been achieved. Although trigger pull is not lightened by the Overwatch trigger itself, the reduction in pull length and super smooth operation combined with the flat face provides the ultimate combo on a striker fired pistol. Paired with the aforementioned parts above, my trigger pull comes in at 4 lbs on the nose with absolutely no wall to stack up against and a buttery smooth minus 1/4" pull with zero overtravel. It is very much like a custom tuned 1911 with the straight rearward pull. If you run the above combo, be ready and practice dry firing a lot, it will surprise you. ***DISCLAIMER*** THE ABOVE SETUP IS ABSOLUTELY NOT RECOMMENDED FOR CCW. However, the Overwatch trigger paired with or without other connectors absolutely is. I have tried many and they all fall short in one way or another of what this company has achieved. Outside of a stock trigger, this one is the only one I trust with my life in a duty weapon. It's amazing by itself and needs nothing else, I can never seem to just leave well enough alone. Single best mod you can do to your Glock. Well.., of course sights too. This company and these guys have change everything. I will without a doubt be buying more of these triggers and will, with the utmost confidence, highly recommend them to all Glock owners. After years and years spent working on firearms, there is no better Glock trigger.
Posted by Ddub on Jan 14th 2017
I bought this trigger and an apex . Both passed the safety checks . I polished the apex trigger and installed it in my gen 3 and it works great , feels the same as the original may be a little smoother. The TAC trigger is great as well, I actually prefer it over the apex. I did not polish it and just put it in my gen4 . Man is it nice ! Smooth, shorter pre travel, looks awesome and I just love it. If you want a flat faced trigger as I did then my choice is the TAC Glock kraft but both are nice.
Posted by Shaman on Jan 13th 2017
I am very happy with this purchase, and I'm recommending this trigger to all of my friends who have a Glock. The other trigger I was looking at getting before this was recommended to me was the Haley Skimmer. The Skimmer is supposed to eliminate pre travel and shortens reset as well, but it does not keep all of the Glocks factory safeties. So I chose the Overwatch because it essentially does the same thing and it has a flat trigger which looks and feels great.
Install was very easy. It required no fitting, it just dropped in. The only issue I had was when I was putting the trigger pin (large one) back into the frame. It took me a few tries to line up the trigger and slide stop holes but once I did the pin went in easily. It was a bit easier to get that pin in with the factory pin rather than a stainless one.
The TAC completely removes the mushy take up of the stock trigger and shortens the reset, all without bypassing any safeties. With the trigger being flat I notice I pull much straighter and there's no unnecessary serrations on the trigger face. I did polish the bar where it touches the connector but that's not needed. I've only put about 100 rounds through my G19 after installing it and there hasn't been any issues so far. I plan on getting a G43 in the future and will install a TAC in that if it continues to be reliable. Also the gold trigger safety looks classy af.
True drop in part
Posted by MICHAEL DAVID THOMAS on Jan 9th 2017
Easy trigger replacement. Love the shortened length of pull. Very little take up, with a clean break. Feels good on your finger. As advertised, does not change pull weight.
Thanks for a great product!
Posted by Dan on Jan 9th 2017
Bought one trigger for my glock 19. After building up the saving a little, I will be ordering triggers for all my remaining glocks. Guys on my tac team were amazed at the difference in take up and reset. Worth every penny!
Posted by Dustin Kruger on Jan 7th 2017
This trigger is a must but upgrade. Very crisp. Very smooth. I can't wait to see how much it improves my grouping!
Posted by Taylor on Jan 7th 2017
Although this is my first aftermarket trigger I have bought, I couldn't be more pleased with this purchase. I did extensive research between this and other triggers like the zev and phantom triggers. Simple to install, took me maybe 10 minutes if even that. Overall I couldn't be happier with it. Recommended to some buddies and I will be purchasing again for some of my own builds.
Glock 30 gen 4
Posted by Unknown on Jan 6th 2017
Best upgrade so far, almost no take up, great reset and I love the flat trigger. Not to mention it looks spectacular! Thanks overwatch for a great trigger that's retains all the factory safety's , will be buying more in the future.
tac on g19
Posted by devyn sarrazin on Jan 6th 2017
Fast shipping, it's a smooth trigger pull once you put some rounds through it. When it was first installed I was a little hesitant on saying that I liked it, but it gets better the more and more I shoot it.
The only thing I was really disappointed about was the color is not what I thought it was going to be. Definitely would have gotten a different color if I knew The gunmetal gray looked like this in person, it's pretty far off the pictures I've seen. But that's the only bad thing I can say about it.
Showing reviews 1-10 of 141 | Next