Drop In Trigger Kit

Current stock: 0



The Overwatch Precision TAC Trigger Kit is a flat-faced, direct drop-in replacement for your OEM trigger assembly. Each trigger shoe and trigger safety tab is machined in the USA out of 7075-T6 aluminum alloy, and affixed to an NP3 plated, OEM trigger bar by 316 Stainless Steel coiled spring pins. The trigger shoe and safety tab are both Type III hard coat anodized to MIL-A-8625 standard.  

The small indexing hook ensures consistent trigger finger placement, and the broad, flat face of the trigger allows a uniquely self-correcting, straight rearward press. The flat face reduces trigger reach by approximately 20% (depending on tolerances), making this an ideal option for smaller statured shooters. Pre-travel has been reduced as much as possible without compromising firearm safety features, resulting in a clean, crisp break, and reduced overtravel. Robar's NP3 plating provides virtually impermeable corrosion resistance and smooth, grit-free operation.

Included in this kit is a trigger mechanism and ejector housing, a trigger spring, an NP3 plated Overwatch Precision Minus connector, and (of course) our TAC or Falx Trigger on an NP3 plated trigger bar. The addition of the NP3 Overwatch Precision minus connector results in a drop of approximately a half to three quarters of a pound on the pull weight depending on individual tolerances.



Important Notes:

Our lawyer says that this should be installed by a qualified gunsmith.

DISCLAIMER: "GLOCK" is a federally registered trademark of Glock, Inc., and is one of many trademarks owned by Glock Inc. or Glock Ges.m.b.H. Neither Overwatch Tactical LLC, dba Overwatch Precision, nor this site is affiliated in any manner with, or otherwise endorsed by Glock, Inc., or Glock Ges.m.b.H. The use of "Glock" on this page is merely to advertise the sale of Glock pistols, parts, or components.


Reviews (19)

Shawn connolly Sep 17th 2018

Very satisfied !!!!

I recently purchased two complete drop in tac trigger kits for a G 26 and a sc poly 80 build I was doing. I am amazed at the quality and craftsmanship that went into making these trigger systems. The NP3 coating is extremely slick coupled with the coated Glock oem - trigger bar and you have 1 hell of a trigger system. It’s not too much and it’s not too little it is just right. The overtravel was reduced , take up much less, on to a nice crisp break and short tactile reset. The flat faced trigger is easier to shoot than an oem trigger. It seems your finger finds the same spot each time. Trigger pull is straight back and you have much less chance of pulling your shot. Love theese new triggers. Top notch Thank you

Paul Sep 17th 2018

TAC drop in trigger

Great trigger! The Glock trigger is why I love Glocks but this trigger is an improvement on the stock trigger.I own several of these and love the crisp break and shorter travel. I highly recommend this trigger and will continue to purchase more. I have convinced some of my friend to purchase them as well. Thanks for the great product!

Additional Info

Additional Info